| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.250 INCHES NOMINAL |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE OVERALL OR |
| MATT |
MATERIAL |
STEEL COMP 304L OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 305 OVER |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| FEAT |
SPECIAL FEATURES |
NONSTANDARD POINT NO. 7,60 DEG ANGLE,0.119 IN. LG |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASA |
THREAD LENGTH |
0.250 INCHES MINIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
