| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
4 |
| AASB |
FASTENER LENGTH |
0.910 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AASL |
HEAD DIAMETER |
0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD 171,FIN. 1.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CHROMIUM OVERALL |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.350 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
