| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.405 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OVERALL OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OVERALL OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303F OVERALL OR STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AASA |
THREAD LENGTH |
0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
