| MRC |
Requirement Statement |
Characteristics |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.041 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| MATT |
MATERIAL |
STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 316 OVE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.060 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
| AASA |
THREAD LENGTH |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
80 |
