| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.296 INCHES NOMINAL FIRST HOLE |
| AASB |
FASTENER LENGTH |
3.469 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.4362 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.812 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 5TH MATERIAL RESPONSE OVE |
| MATT |
MATERIAL |
STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.437 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES NOMINAL FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AATB |
WIDTH BETWEEN FLATS |
0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.657 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
