| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.808 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.438 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.048 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
3 |
| BQDM |
HOLE TYPE |
DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-DTL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING FEATURE |
| MATT |
MATERIAL |
STEEL COMP 4340 BEARING SURFACE OF HEAD OR STEEL COMP 8740 BEARING SURFACE OF HEAD |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AAUM |
LOCKING FEATURE |
PATCH THREADS OR PELLET THREADS OR STRIP THREADS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6415 ASSN STD 1ST MATERIAL RESPONSE BEARING SURFACE OF HEAD OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE BEARING SURFACE OF HEAD OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BEARING SURFACE OF HEAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYII, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.370 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
