| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.149 INCHES NOMINAL OVERALL |
| AASB |
FASTENER LENGTH |
1.281 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.938 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.102 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL AND MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL AND MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL AND STEEL COMP E4340 OVERALL AND STEEL COMP 8740 OVERALL AND STEEL COMP 8735 OVERALL AND STEEL COMP 6150 OVERALL AND STEEL COMP 4037 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM OVERALL AND 0.116 INCHES MAXIMUM OVERALL |
| AAWU |
SINGLE SHEAR STRENGTH |
10500 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
ADDITIONAL MDCL ARE MIL-S-8503 AND MIL-S-8695 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.552 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TY2CL2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.343 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
