| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
3.367 INCHES MINIMUM AND 3.397 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
2.778 INCHES MINIMUM AND 2.798 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASU |
HEAD HEIGHT |
0.218 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.562 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6209 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
3 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.569 INCHES MINIMUM AND 0.619 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
