| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
NG NAV SYSTEM |
| AASB |
FASTENER LENGTH |
2.138 INCHES MINIMUM AND 2.168 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5731,5732,5737 OR AMS5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THREAD,REDUCED MAJOR DIAMETER,SELF-LOCKING AND NONLOCKING,160 KSI FTU |
| FEAT |
SPECIAL FEATURES |
FINISH IS IDENTIFIED WITH GREEN DYE OR PAINT ON THREAD END MAXIMUM COVERAGE MAY INCLUDE THE CHAMFER PLUS ONE INCOMPLETE THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6303 THRU 6320 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.528 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
