| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.310 INCHES MINIMUM AND 2.340 INCHES MAXIMUM ALL HOLES |
| AASB |
FASTENER LENGTH |
2.517 INCHES MINIMUM AND 2.547 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| AGAV |
III END ITEM IDENTIFICATION |
1055-01-536-7106 |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.5625 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6349 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6382 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6484 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM ALL HOLES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS-QQ-P-416, TYPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.594 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
