| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.466 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| AAWY |
COUNTERBORE DIAMETER |
0.168 INCHES MINIMUM NUT |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 OR IRON ALLOY 660 CAP |
| MATT |
MATERIAL |
STEEL COMP 321 OR IRON ALLOY 660 SHELL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| ADFK |
NUT COUNTERBORE DEPTH |
0.063 INCHES MINIMUM NUT |
| ADEA |
NUT HEIGHT |
0.250 INCHES NOMINAL |
| ACVN |
NUT LENGTH |
0.686 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
NAVY SPECIAL PROJECT |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5525 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| ADEB |
PLATE THICKNESS |
0.025 INCHES NOMINAL |
| ADEC |
PLATE WIDTH |
0.367 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.508 INCHES MINIMUM AND 0.538 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNJC |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE CAP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE SHELL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AZKQ |
TEMP RATING |
800.0 DEG FAHRENHEIT NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
