| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
1.300 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
0.904 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.493 INCHES MINIMUM AND 0.498 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.228 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
30.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.094 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| HGTH |
HEIGHT |
0.250 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
DRILLED THRU HEAD |
| MATT |
MATERIAL |
STEEL COMP 630 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| FEAT |
SPECIAL FEATURES |
0.250 IN. DIA HOLE DRILLED THRU LONGITUDINAL AXIS |
| CRRG |
PIN HEAD DIAMETER |
0.625 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
1.230 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
