| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.187 INCHES NOMINAL |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.438 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
4.922 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.062 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.094 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
58.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
DEE |
| HGTH |
HEIGHT |
0.375 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MATT |
MATERIAL |
STEEL COMP 1015 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1025 OVERALL |
| CRRG |
PIN HEAD DIAMETER |
1.125 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
5.156 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.688 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.062 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES OUTSIDE DIAMETER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232 TY Z CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC OVERALL |
