| MRC |
Requirement Statement |
Characteristics |
| ABMZ |
DIAMETER |
0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| HGTH |
HEIGHT |
0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-862,CLASS 324 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
1.458 INCHES MINIMUM AND 1.478 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.151 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES ALL OTHER SURFACES |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
