| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.288 INCHES MINIMUM AND 1.318 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.094 INCHES MINIMUM AND 1.157 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| AAZG |
HEAD MAJOR DIAMETER |
0.386 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 4037 BODY OR STEEL COMP 4130 BODY OR STEEL COMP 4027 BODY OR STEEL COMP 8630 BODY OR STEEL COMP 8740 BODY |
| MATT |
MATERIAL |
STEEL COMP 4037 STEM OR STEEL COMP 4130 STEM OR STEEL COMP 4027 STEM OR STEEL COMP 8630 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES BODY OR MIL-S-8758 MIL SPEC 1ST MATERIAL RESPONSE BODY OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES STEM OR MIL-S-8758 MIL SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
3450 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY AND CHROMATE BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
