| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE OR STEEL COMP 303 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4130 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT OR STEEL COMP 4130 NUT |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| FEAT |
SPECIAL FEATURES |
SELF-LOCKING |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1750 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE AND PASSIVATE SLEEVE |
