| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 100.1 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED MANDREL |
| AASB |
FASTENER LENGTH |
1.026 INCHES MINIMUM AND 1.056 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.906 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM BOLT AND 53.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM NUT AND 53.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
NICKEL ALLOY X-750 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP H11 BOLT |
| MATT |
MATERIAL |
STEEL COMP H11 NUT |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL OR DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5667 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS 5582 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| FEAT |
SPECIAL FEATURES |
COLOR NUT BLUE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD 1ST TREATMENT RESPONSE BOLT AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD 1ST TREATMENT RESPONSE NUT AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
