| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.531 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.281 INCHES MINIMUM AND 1.345 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM BODY |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATT |
MATERIAL |
STEEL COMP 4027 OR STEEL COMP 4037 OR STEEL COMP 4130 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD 1ST MATERIAL RESPONSE OR ASTM A547 ASSN STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
5900 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL @2 FED SPEC ALL TREATMENT RESPONSES SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
