| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
ANNEALED OVERALL |
| AASK |
HEAD STYLE |
HEXAGON COUNTERSUNK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE STEM OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-282 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 BODY |
| MATT |
MATERIAL |
STEEL COMP 303F SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 STEM OR STEEL COMP 8740 STEM OR STEEL COMP 4140 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
18000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
WAX OR DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
5300 DOUBLE POUNDS PER SQUARE INCH |
| ASDB |
WIDTH ACROSS FLATS |
0.458 INCHES MINIMUM AND 0.472 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
ANODIZE BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
