| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.278 INCHES MINIMUM AND 0.308 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM OVERALL AND 46.0 ROCKWELL C MAXIMUM OVERALL |
| AAZG |
HEAD MAJOR DIAMETER |
0.325 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
ANNEALED OVERALL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE OR STEEL COMP 303 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4130 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT OR STEEL COMP 4130 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
GREASE FILM |
| AAZE |
SHANK DIAMETER |
0.164 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
3760 DOUBLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND PASSIVATE SLEEVE |
