| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.713 INCHES MINIMUM AND 0.743 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.595 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE OR STEEL COMP 303 SLEEVE OR STEEL COMP 303F SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4130 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4140 NUT OR STEEL COMP 4130 NUT OR STEEL COMP 8740 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
WAX OR DRY FILM OR CETYL ALCOHOL OR GREASE FILM |
| AAZE |
SHANK DIAMETER |
0.202 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
