| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.276 INCHES MINIMUM AND 0.306 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM BOLT AND 45.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM NUT AND 45.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
IRON ALLOY 660 NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE BOLT OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE NUT |
