| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.323 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.229 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
IRON ALLOY 660 LOCKING RING |
| MATT |
MATERIAL |
IRON ALLOY 660 SLEEVE |
| MATT |
MATERIAL |
IRON ALLOY 660 STEM |
| ABAJ |
LUBRICATION |
DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
1090 SINGLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
RIVET MAY BE SLOSH CLEANED WITH MIL-C-38736 CLEANER BEFORE INSTALLATION |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1921 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,CL 3,TY 2 FED SPEC 2ND TREATMENT RESPONSE OR NAS 4006 ASSN STD 3RD TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OR CADMIUM AND CHROMATE OR ALUMINUM ALLOY SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE LOCKING RING |
| SFTT |
SURFACE TREATMENT |
PASSIVATE STEM |
