| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
DRIVE STEM-TYPE H |
| AASB |
FASTENER LENGTH |
0.524 INCHES MINIMUM AND 0.544 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.478 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.250 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 431 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
105000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
DRIVE PIN |
| CQSX |
SHEAR STRENGTH |
75000 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
