| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.501 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
43.5 ROCKWELL C MINIMUM BOLT AND 46.5 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
43.5 ROCKWELL C MINIMUM NUT AND 46.5 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.337 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 BOLT |
| MATT |
MATERIAL |
STEEL COMP 8740 NUT |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.2209 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| FEAT |
SPECIAL FEATURES |
0.2120 IN. SECOND SHANK DIAMETER |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
LEFT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
