| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
DRIVE STEM-TYPE H |
| AASB |
FASTENER LENGTH |
0.334 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.172 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
95.0 ROCKWELL B MAXIMUM BODY |
| AAZG |
HEAD MAJOR DIAMETER |
0.357 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 1006 BODY OR STEEL COMP 1008 BODY OR STEEL COMP 1009 BODY OR STEEL COMP 1010 BODY OR STEEL COMP 1011 BODY OR STEEL COMP 1012 BODY OR STEEL COMP 1013 BODY OR STEEL COMP 1015 BODY OR STEEL COMP 1016 BODY OR STEEL COMP 1017 BODY OR STEEL COMP 1018 |
| MATT |
MATERIAL |
STEEL COMP 301 STEM OR STEEL COMP 302B STEM OR STEEL COMP 302 STEM OR STEEL COMP 303 STEM OR STEEL COMP 303SE STEM OR STEEL COMP 304 STEM OR STEEL COMP 304L STEM OR STEEL COMP 305 STEM OR STEEL COMP 308 STEM OR STEEL COMP 309 STEM OR STEEL COMP 309S STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD 66 FED STD ALL MATERIAL RESPONSES BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED STD 66 FED STD ALL MATERIAL RESPONSES STEM |
| AAZE |
SHANK DIAMETER |
0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
DRIVE PIN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY AND CHROMATE BODY |
| SFTT |
SURFACE TREATMENT |
PASSIVATE STEM |
