| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| AASB |
FASTENER LENGTH |
0.220 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.996 INCHES MINIMUM AND 1.046 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BODY AND 43.0 ROCKWELL C MAXIMUM BODY |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM STEM AND 43.0 ROCKWELL C MAXIMUM STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BODY OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BODY OR STEEL COMP 304 BODY OR STEEL COMP 8740 BODY |
| MATT |
MATERIAL |
STEEL COMP 4130 STEM OR STEEL COMP 304 STEM OR STEEL COMP 8740 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
200000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
GREASE FILM OR DRY FILM |
| AAZE |
SHANK DIAMETER |
0.2280 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM |
| CQSX |
SHEAR STRENGTH |
5240 DOUBLE POUNDS PER SQUARE INCH |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE SLEEVE OR QQ-P-416,TYPE11,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 11,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE OR CADMIUM SLEEVE |
