| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
60.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
EXPANDER |
| ANEE |
GRIP LENGTH |
1.593 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.672 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
ANNEALED SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MATT |
MATERIAL |
STEEL COMP 303SE SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4140 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT OR STEEL COMP 8740 NUT OR STEEL COMP 4140 NUT |
| ABAJ |
LUBRICATION |
WAX OR DRY FILM OR GREASE FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5641 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING HIGH CLINCH SHANK |
| FEAT |
SPECIAL FEATURES |
PROTRUSION FROM HEAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
