| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.753 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.281 INCHES MINIMUM AND 1.345 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM AND 466.0 KNOOP MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
1.017 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4027 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4150 OR STEEL COMP 4340 OR STEEL COMP 4620 OR STEEL COMP 4815 OR STEEL COMP 8615 OR STEEL COMP 8620 OR STEEL COMP 8630 OR STEEL COMP 874 |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4027 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4150 OR STEEL COMP 4340 OR STEEL COMP 4620 OR STEEL COMP 4815 OR STEEL COMP 8615 OR STEEL COMP 8620 OR STEEL COMP 8630 OR STEEL COMP 874 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD ALL MATERIAL RESPONSES STEM |
| AAZE |
SHANK DIAMETER |
0.496 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
