| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.499 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
NICKEL ALLOY X-750 SLEEVE OR IRON ALLOY 660 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP H11 HEAD |
| MATT |
MATERIAL |
STEEL COMP H11 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
3650 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
CARBO WAX OR CETYL ALCOHOL OR DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6487 ASSN STD SINGLE MATERIAL RESPONSE HEAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6487 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5667 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS5582 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS5731 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS5732 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS5737 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| CQSX |
SHEAR STRENGTH |
11800 DOUBLE POUNDS PER SQUARE INCH |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD SINGLE TREATMENT RESPONSE HEAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 ASSN STD SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY I,CLS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM HEAD |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
