| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.905 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.719 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM AND 466.0 KNOOP MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.333 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAPC |
IDENTIFICATION CODE COLOR |
GREEN |
| MATT |
MATERIAL |
STEEL COMP 4027 OR STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4150 OR STEEL COMP 4620 OR STEEL COMP 4815 OR STEEL COMP 6150 OR STEEL COMP 8615 OR STEEL COMP 8620 OR STEEL COMP 8630 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| AAZE |
SHANK DIAMETER |
0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
112000 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-83488 MIL SPEC 2ND TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OR ALUMINUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR ALUMINUM STEM |
