| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.092 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.333 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1144 OR STEEL COMP 4037 OR STEEL COMP 4130 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL COMP 4027 OR STEEL COMP 4037 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
112000 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES MECHANICAL LOCK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| FEAT |
SPECIAL FEATURES |
SINGLE ACTION FASTENER WITHOUT FRANGIBLE TYPE OF LOCKING COLLAR OR LOCKING COLLAR CAP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES MECHANICAL LOCK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
