| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| ANEE |
GRIP LENGTH |
0.345 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.375 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 303SE SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 NUT |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 STEM |
| ABAJ |
LUBRICATION |
DRY FILM OR CETYL ALCOHOL OR PARAFFIN WAX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4928 ASSN STD 1ST MATERIAL RESPONSE NUT OR AMS4967 ASSN STD 2ND MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4928 ASSN STD 1ST MATERIAL RESPONSE STEM OR AMS4967 ASSN STD 2ND MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.2580 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| FEAT |
SPECIAL FEATURES |
COMPLETE TOP SURFACE OF HEAD SHALL BE POWDER BLASTED TO PRODUCE A SURFACE FINISH OF RA 50/80 MICRO INCHES AFTER ALL MANUFACTURING OPERATIONS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
