| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| CBBL |
FEATURES PROVIDED |
SELF-LOCKING |
| ANEE |
GRIP LENGTH |
0.470 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 46.0 ROCKWELL C MAXIMUM BOLT39.0 ROCKWELL C MINIMUM NUT AND 46.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLTMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S6049 M |
| MATT |
MATERIAL |
STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLTSTEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUTSTEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| CQBC |
MINIMUM TENSILE STRENGTH |
14000 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
WAX AND CETYL ALCOHOL AND SOLID FILM |
| AAZE |
SHANK DIAMETER |
0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLTQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUTQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CHROMATE BOLTCADMIUM NUT AND CHROMATE NUTCADMIUM SLEEVE |
