| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
T-38A ACFT |
| ABAF |
EXPANSION DEVICE |
THREADED SLEEVE |
| ANEE |
GRIP LENGTH |
0.345 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL OR CETYL ALCOHOL OR SOLID FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
IL-S-6758 FED SPEC 10TH MATERIAL RESPONSE BOLT OR IL-S-5626 FED STD 10TH MATERIAL RESPONSE BOLT OR IL-S-6049 MIL SPEC 10TH MATERIAL RESPONSE BOLT |
| AAZE |
SHANK DIAMETER |
0.2290 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ORIGINAL NAME: FASTENER |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
