| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| AASB |
FASTENER LENGTH |
1.306 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
DRIVE NUT |
| ANEE |
GRIP LENGTH |
0.845 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.2700 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE OR AMS5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 303SE SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 NUT |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
1250 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
DRY FILM OR CETYL ALCOHOL OR PARAFFIN WAX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE STEM OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.1970 INCHES MINIMUM AND 0.1990 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CQSX |
SHEAR STRENGTH |
4600 DOUBLE POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
76823-03A053 MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
