| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
B 2 BOMBER3 |
| AASB |
FASTENER LENGTH |
1.263 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.938 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MATT |
MATERIAL |
NICKEL ALLOY 718 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
125000 SINGLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN, THREADED, HEX POINT DRIVE, PROTRUDING TENSION HEAD, CRES |
| FEAT |
SPECIAL FEATURES |
NOMINAL PARTS SHOULD HAVE A DARK GREEN DYE ON THE CHAMFER AREA INDICATED COVERAGE SHALL NOT EXTEND BEYOND THE FIRST TWO THREADS AND SHALL BE OF THE TYPE THAT BE REMOVED WITH NORMAL CLEANING SOLVENTS SHALL HAVE EVIDENCE OF BROKEN EDGE ACROSS POINTS OF HEX |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
