| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AIRCRAFT,F-16 |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.888 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.469 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM SLEEVE AND 466.0 KNOOP MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.386 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING MECHANICAL LOCK OR STEEL COMP 1010 MECHANICAL LOCK OR STEEL COMP 1020 MECHANICAL LOCK OR STEEL COMP 1144 MECHANICAL LOCK OR STEEL COMP 4037 MECHANICAL LOCK OR STEEL COMP 4130 MECHANICAL LOCK OR IRON ALLOY 660 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING SLEEVE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5737 ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK OR AMS5690, TYPE 316,CRES ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
FASTERNER,BLIND,HIGH STRENGTHPULL TYPE,POSITIVE MECHANICAL LOCK,100 DEGREE FLUSH HEAD |
| FEAT |
SPECIAL FEATURES |
INSTALLED WITH SINGLE ACTION TOOL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TUPE1,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE STEM OR MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK OR MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE OR MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM MECHANICAL LOCK AND PASSIVATE MECHANICAL LOCK AND ALUMINUM MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND ALUMINUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM AND ALUMINUM STEM |
