| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
AIRCRAFT, SOF (AC-130H, MC-130H, EC-130E, HC-130) |
| AASB |
FASTENER LENGTH |
0.950 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.625 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6826 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6019 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
2500 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAZE |
SHANK DIAMETER |
0.188 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
5380 DOUBLE POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HI-LOK PROTRUDING HEAD PIN, ALLOY STEEL |
| FEAT |
SPECIAL FEATURES |
GCADMIUM PLATE COLOR BRONZE HEAD CUT AT 45 DEG ANGLE AND 1/32 DIMENTION APPLY AFTER FINISH COLLAR PART NUMBER HL18PB70 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
