| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
F-16 AIRCRAFT |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| ANEE |
GRIP LENGTH |
0.312 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM MANDREL AND 53.0 ROCKWELL C MAXIMUM MANDREL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM SLEEVE AND 45.0 ROCKWELL C MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.244 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 4027 SLEEVE OR STEEL COMP 4037 SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTMA752 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.190 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
SELF-PLUGGING |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
RIVET, BLIND, HIGH STRENGTH, PULL TYPE, 100 DEGREE FLUSH REDUCED HEAD, 112 KSI SHEAR |
| FEAT |
SPECIAL FEATURES |
MATERIAL BREAKDOWN AS FOLLOWS, SLEVE, ALLOY STEEL 4027 OR 4037 PER CHEMICAL REQUIREMENTS OF ASTM A752 SERRATED PIN IS ALLOY STEEL 8740 PER CHEMICAL REQUIREMENTS OF MIL-S-6049 OR ASTM A752 MECHANICAL LOCK IS CARBON OR ALLOY STEEL CONFORMING TO CHEMICAL REQ |
