| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| CBBL |
FEATURES PROVIDED |
DRIVE NUT |
| ANEE |
GRIP LENGTH |
0.845 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| AASU |
HEAD HEIGHT |
0.135 INCHES NOMINAL |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS 5626 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
2100 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL OR PARAFFIN WAX OR DRY FILM |
| AAZE |
SHANK DIAMETER |
0.2470 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| CQSX |
SHEAR STRENGTH |
7770 DOUBLE POUNDS PER SQUARE INCH |
| ASDB |
WIDTH ACROSS FLATS |
0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
