| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
VERTICAL STABILIZER AIRCRAFT, HORNET F/A-18 (E/F) |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.053 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.594 INCHES MINIMUM AND 0.657 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 1020 MECHANICAL LOCK OR STEEL COMP 1044 MECHANICAL LOCK OR STEEL COMP 4037 MECHANICAL LOCK OR STEEL COMP 4130 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL SLEEVE |
| MATT |
MATERIAL |
STEEL STEM |
| CQBC |
MINIMUM TENSILE STRENGTH |
3650 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD 1ST MATERIAL RESPONSE MECHANICAL LOCK OR AMS 286 ASSN STD 2ND MATERIAL RESPONSE MECHANICAL LOCK OR AMS 5737 ASSN STD 3RD MATERIAL RESPONSE MECHANICAL LOCK OR AMS 5690 ASSN STD 4TH MATERIAL RESPONSE MECHANICAL LOCK |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A-331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
5900 SINGLE POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96908-MS90353 GOVERNMENT SPECIFICATION |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ALUMINUM OVERALL |
