| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
PLAIN STEM-TYPE T |
| AASB |
FASTENER LENGTH |
0.762 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AGAV |
III END ITEM IDENTIFICATION |
F/A-18 HORNET |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5056 SLEEVE |
| MATT |
MATERIAL |
IRON ALLOY 660 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 GRIP |
| MATT |
MATERIAL |
IRON ALLOY 660 OR STEEL COMP 304 LOCKING RING |
| MATT |
MATERIAL |
STEEL COMP 632 OR IRON ALLOY 660 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5651 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE GRIP |
| AAZE |
SHANK DIAMETER |
0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 1, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR PASSIVATE STEM |
| SFTT |
SURFACE TREATMENT |
CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE GRIP |
| SFTT |
SURFACE TREATMENT |
PASSIVATE LOCKING RING |
